FLOAT SWITCH – 2METER 0.5MM

Used for detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices. Advantages: • Corrosion Free, Sturdy and durable & need no maintenance. • No current/Voltage is passed through water, therefore no electrolysis or Salt deposition. • Long life (Approximate 10 million operations) • Rust proof (Entire sensor body in Polypropelene) • Can be used in hard water or fuel such as diesel, kerosene, oil etc. Specification: • Rated Voltage: 250 V • Rated Current: 8A • Working Temperature: 0-80°C • Working Pressure: 0.5 Mpa • Cable Material: PVC/Rubber • Cable Length: 2 Meters • Conductor Size: 3 x 0.5 mm 2 (Standard) • Weight: 450 gm Instructions For Installation: Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure. Disclaimer : Product colour may slightly vary due to photographic lighting sources or your monitor settings.