SN75173N DIP IC

Meet or Exceed the Requirements of
TIA/EIA-422-B, TIA/EIA-423-B, and
TIA/EIA-485-A and ITU Recommendations
V.10, V.11, X.26, and X.27
Designed for Multipoint Bus Transmission
on Long Bus Lines in Noisy Environments
3-State Outputs
Common-Mode Input Voltage Range of
?12 V to 12 V
Input Sensitivity … ?200 mV
Input Hysteresis . . . 50 mV Typ
High Input Impedance . . . 12 k? Min
Operate From Single 5-V Supply
Low Power Requirements
Pin-to-Pin Replacement for AM26LS32
description
The SN55173, SN65173, and SN75173 are
monolithic quadruple differential line receivers
with 3-state outputs. They are designed to meet
the requirements of TIA/EIA-422-B,
TIA/EIA-423-B, TIA/EIA-485-A, and several ITU
recommendations. The standards are for
balanced multipoint bus transmission at rates up
to 10 megabits per second. The four receivers
share two OR enable inputs, one active when
high, the other active when low. These devices
feature high input impedance, input hysteresis for
increased noise immunity, and input sensitivity of
?200 mV over a common-mode input voltage
range of ?12 V to 12 V. Fail-safe design specifies
that if the inputs are open circuited, the outputs are
always high. The SN65173 and SN75173 are
designed for optimum performance when used
with the SN75172 or SN75174 quad differential
line drivers.
The SN55173 is characterized over the full military temperature range of ?55?C to 125?C. The SN65173 is
characterized for operation from ?40?C to 85?C. The SN75173 is characterized for operation from 0?C